Follow these easy steps to get your Zanussi ZX 55/4 W, ZX 55/4 SI Refrigerator up and running in no time.
Remove all securing tapes from the refrigerator. Ensure that the appliance is free from any visible damage. Check that all parts are present.
Wash the inside of the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water) to remove any manufacturing residues. Dry thoroughly with a soft cloth.
Place the refrigerator in a suitable location, away from heat sources like cookers, radiators, or direct sunlight. It should be positioned close to a wall but with enough space for ventilation as per installation instructions.
Ensure the appliance is connected to a mains power supply that matches the voltage and frequency specified on the appliance's rating plate. The plug must be easily accessible after installation.
Leave the appliance to stand for 2 hours after installation before turning it on. This allows the refrigerant to settle.
Plug in the appliance and switch on at the mains supply. Turn the thermostat control to a midway setting (3-4). The pilot light will illuminate, indicating the appliance is operational.
Adjust the thermostat control and the air circulation slider control to maintain the desired temperature. For ambient temperatures above 16°C, set the slider midway between 'MIN' and 'MAX'.
Allow the refrigerator to cool down and reach the correct temperature, approximately 4 hours, before placing food inside.